About This

• The Edge Blaster was designed to be used after the grass has been edged with a steel bladed lawn edger leaving a nice clean groove between grass and cement. Without edging the grass first you will find that the Edge Blasters performance will be reduced. Please Edge Grass First (steel blade not string edger). Spray tip not included; use your white spray tip that came with your pressure washer. Made in USA, Patent # 9,552,408
• For Use With Gasoline Pressure Washers, (Most electric pressure washers have spray wands that are too short for the Edge Blaster. Some electric pressure washers may not fit the Edge Blasters connection and can be under powered for a good clean job). Compare your wand connection to the wand connection in the picture. Recommended spray wand length is 3 feet, 6 inches. Recommended pressure washer PSI is 2800 or greater.
• Plug your pressure washers white spray tip into the Edge Blasters brass connection then plug Edge Blaster into your wands brass connection.
• The high water pressure locks the Edge Blaster in place preventing it from rotating. The recommended sequence is to edge grass first, blow mess off sidewalk with leaf blower. The next step is to clean edges of sidewalk or driveway with the Edge Blaster. The next step is to clean the infield of sidewalks or driveway with a surface cleaner or turbo nozzle and then do a final rinsing.
• The Edge Blaster reduces the mess of pressure washing. There is a learning curve so read all of the operating instructions carefully.